Søg på hele sitet

Blev først i sidste uge klar over at Nilan nu udbyder Nilan Connect så man kan tilgå og styre anlægget udefra via eks. en android mobil. Vi er bortrejst 2 x 2-3 mdr. hver vinter, og sidste gang vi kom hjem var huset klamt og indelukket fordi vores Nilan anlæg havde slukket sig selv grundet en banal fejl. Anlægget kan åbenbart ikke selv finde ud af at genstarte selv om fejlen bare kan afstilles ved at trykke et par gange på panelet. Er klar over at med Nilan Connect skal man alligevel have en hjælper til at gå ind i huset og trykke alarmen væk, men så ved man da i det mindste at anlægget er gået i stå. Ved nogen om man kan nøjes med et Nilan Connect basismodul når man har et CTS602 styret anlæg eller skal man også have switchen? Skiftede for et par år siden vores gamle trådede gulvvarmestyring til et trådløst system. Havde jeg dengang vidt at Wavin blev uderstøttet, ja så havde jeg klart valgt dette, men nu faldt valget på et Roth system. Er der evt. en "fuskerløsning" så det alligevel kan virke med Roth gulvvarmestyring? Ud over dette har vi IHC, elskab som fjernaflæses fra centralen (kan man tilgå den fra NC og se forbrug?), Vaillant naturgasfyr med multiMATIC VRC 700 udeføler.

Jeg har fået Roth Touchline til at virke med Google Assistant, fandt en kode som jeg har ændret lidt i, hvis nogen skulle være interesseret. Openhab2 ser det ikke længere som en termostat, men det gør Google Home og set punkt kan ændres. Har dog ikke fundet løsningen på at skifte mellem "Varme - Køling - Fra" HTTP binding skal installeres i PaperUI - Husk af ændre IP i Rules fil Items fil Group g_vaerelse0_TSTAT "Værelse 0" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse0_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse0_TSTAT) [ "TargetTemperature" ] Group g_vaerelse1_TSTAT "Værelse 1" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse1_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse1_TSTAT) [ "TargetTemperature" ] Group g_vaerelse2_TSTAT "Værelse 2" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse2_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse2_TSTAT) [ "TargetTemperature" ] Group g_vaerelse3_TSTAT "Værelse 3" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse3_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse3_TSTAT) [ "TargetTemperature" ] Group g_vaerelse4_TSTAT "Værelse 4" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse4_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse4_TSTAT) [ "TargetTemperature" ] Group g_vaerelse5_TSTAT "Værelse 5" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse5_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse5_TSTAT) [ "TargetTemperature" ] Group g_vaerelse6_TSTAT "Værelse 6" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse6_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse6_TSTAT) [ "TargetTemperature" ] Group g_vaerelse7_TSTAT "Værelse 7" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse7_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse7_TSTAT) [ "TargetTemperature" ] Group g_vaerelse8_TSTAT "Værelse 8" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse8_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse8_TSTAT) [ "TargetTemperature" ] Group g_vaerelse9_TSTAT "Værelse 9" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse9_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse9_TSTAT) [ "TargetTemperature" ] Group g_vaerelse10_TSTAT "Værelse 10" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse10_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse10_TSTAT) [ "TargetTemperature" ] Group g_vaerelse11_TSTAT "Værelse 11" [ "Thermostat" ] Number RaumTempG0 "[%.1f °C]" (g_vaerelse11_TSTAT) [ "CurrentTemperature" ] Number SollTempG0 "[%.1f °C]" (g_vaerelse11_TSTAT) [ "TargetTemperature" ] Rules fil val logName = "rothreadset" val String roth_read = "http://192.168.0.70/cgi-bin/ILRReadValues.cgi" val String roth_set = "http://192.168.0.70/cgi-bin/writeVal.cgi" val String roth_post = "<body><item_list> <i><n>G0.name</n></i><i><n>G0.RaumTemp</n></i><i><n>G0.SollTemp</n></i> <i><n>G1.name</n></i><i><n>G1.RaumTemp</n></i><i><n>G1.SollTemp</n></i> <i><n>G2.name</n></i><i><n>G2.RaumTemp</n></i><i><n>G2.SollTemp</n></i> <i><n>G3.name</n></i><i><n>G3.RaumTemp</n></i><i><n>G3.SollTemp</n></i> <i><n>G4.name</n></i><i><n>G4.RaumTemp</n></i><i><n>G4.SollTemp</n></i> <i><n>G5.name</n></i><i><n>G5.RaumTemp</n></i><i><n>G5.SollTemp</n></i> <i><n>G6.name</n></i><i><n>G6.RaumTemp</n></i><i><n>G6.SollTemp</n></i> <i><n>G7.name</n></i><i><n>G7.RaumTemp</n></i><i><n>G7.SollTemp</n></i> <i><n>G8.name</n></i><i><n>G8.RaumTemp</n></i><i><n>G8.SollTemp</n></i> <i><n>G9.name</n></i><i><n>G9.RaumTemp</n></i><i><n>G9.SollTemp</n></i> <i><n>G10.name</n></i><i><n>G10.RaumTemp</n></i><i><n>G10.SollTemp</n></i> <i><n>G11.name</n></i><i><n>G11.RaumTemp</n></i><i><n>G11.SollTemp</n></i> </item_list></body>" rule "Update Roth Touchline+ temperatures" when System started or //Time cron "*/10 * * * * ? *" or Time cron "23 */10 * * * ? *" then var String SetPoint_read = sendHttpPostRequest(roth_read, "text/xml", roth_post) RaumTempG0.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G0.RaumTemp')]/v", SetPoint_read))) RaumTempG1.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G1.RaumTemp')]/v", SetPoint_read))) RaumTempG2.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G2.RaumTemp')]/v", SetPoint_read))) RaumTempG3.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G3.RaumTemp')]/v", SetPoint_read))) RaumTempG4.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G4.RaumTemp')]/v", SetPoint_read))) RaumTempG5.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G5.RaumTemp')]/v", SetPoint_read))) RaumTempG6.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G6.RaumTemp')]/v", SetPoint_read))) RaumTempG7.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G7.RaumTemp')]/v", SetPoint_read))) RaumTempG8.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G8.RaumTemp')]/v", SetPoint_read))) RaumTempG9.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G9.RaumTemp')]/v", SetPoint_read))) RaumTempG10.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G10.RaumTemp')]/v", SetPoint_read))) RaumTempG11.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G11.RaumTemp')]/v", SetPoint_read))) SollTempG0.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G0.SollTemp')]/v", SetPoint_read))) SollTempG1.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G1.SollTemp')]/v", SetPoint_read))) SollTempG2.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G2.SollTemp')]/v", SetPoint_read))) SollTempG3.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G3.SollTemp')]/v", SetPoint_read))) SollTempG4.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G4.SollTemp')]/v", SetPoint_read))) SollTempG5.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G5.SollTemp')]/v", SetPoint_read))) SollTempG6.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G6.SollTemp')]/v", SetPoint_read))) SollTempG7.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G7.SollTemp')]/v", SetPoint_read))) SollTempG8.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G8.SollTemp')]/v", SetPoint_read))) SollTempG9.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G9.SollTemp')]/v", SetPoint_read))) SollTempG10.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G10.SollTemp')]/v", SetPoint_read))) SollTempG11.sendCommand(transform("REGEX", "s/(.?.)(..)/$1.$2/g", transform("XPATH", "/body/item_list/i[contains(n,'G11.SollTemp')]/v", SetPoint_read))) SollTempG0.label = transform("XPATH", "/body/item_list/i[contains(n,'G0.name')]/v", SetPoint_read).toString + " " + RaumTempG0.state as Number + "°C" SollTempG1.label = transform("XPATH", "/body/item_list/i[contains(n,'G1.name')]/v", SetPoint_read).toString + " " + RaumTempG1.state as Number + "°C" SollTempG2.label = transform("XPATH", "/body/item_list/i[contains(n,'G2.name')]/v", SetPoint_read).toString + " " + RaumTempG2.state as Number + "°C" SollTempG3.label = transform("XPATH", "/body/item_list/i[contains(n,'G3.name')]/v", SetPoint_read).toString + " " + RaumTempG3.state as Number + "°C" SollTempG4.label = transform("XPATH", "/body/item_list/i[contains(n,'G4.name')]/v", SetPoint_read).toString + " " + RaumTempG4.state as Number + "°C" SollTempG5.label = transform("XPATH", "/body/item_list/i[contains(n,'G5.name')]/v", SetPoint_read).toString + " " + RaumTempG5.state as Number + "°C" SollTempG6.label = transform("XPATH", "/body/item_list/i[contains(n,'G6.name')]/v", SetPoint_read).toString + " " + RaumTempG6.state as Number + "°C" SollTempG7.label = transform("XPATH", "/body/item_list/i[contains(n,'G7.name')]/v", SetPoint_read).toString + " " + RaumTempG7.state as Number + "°C" SollTempG8.label = transform("XPATH", "/body/item_list/i[contains(n,'G8.name')]/v", SetPoint_read).toString + " " + RaumTempG8.state as Number + "°C" SollTempG9.label = transform("XPATH", "/body/item_list/i[contains(n,'G9.name')]/v", SetPoint_read).toString + " " + RaumTempG9.state as Number + "°C" SollTempG10.label = transform("XPATH", "/body/item_list/i[contains(n,'G10.name')]/v", SetPoint_read).toString + " " + RaumTempG10.state as Number + "°C" SollTempG11.label = transform("XPATH", "/body/item_list/i[contains(n,'G11.name')]/v", SetPoint_read).toString + " " + RaumTempG11.state as Number + "°C" //logInfo(logName, "return from post" + SetPoint_read) end rule "Set Roth Touchline+ temperatures room 0" when Item SollTempG0 changed then sendHttpGetRequest(roth_set + "?G0.SollTemp=" + (SollTempG0.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 1" when Item SollTempG1 changed then sendHttpGetRequest(roth_set + "?G1.SollTemp=" + (SollTempG1.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 2" when Item SollTempG2 changed then sendHttpGetRequest(roth_set + "?G2.SollTemp=" + (SollTempG2.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 3" when Item SollTempG3 changed then sendHttpGetRequest(roth_set + "?G3.SollTemp=" + (SollTempG3.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 4" when Item SollTempG4 changed then sendHttpGetRequest(roth_set + "?G4.SollTemp=" + (SollTempG4.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 5" when Item SollTempG5 changed then sendHttpGetRequest(roth_set + "?G5.SollTemp=" + (SollTempG5.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 6" when Item SollTempG6 changed then sendHttpGetRequest(roth_set + "?G6.SollTemp=" + (SollTempG6.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 7" when Item SollTempG7 changed then sendHttpGetRequest(roth_set + "?G7.SollTemp=" + (SollTempG7.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 8" when Item SollTempG8 changed then sendHttpGetRequest(roth_set + "?G8.SollTemp=" + (SollTempG8.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 9" when Item SollTempG9 changed then sendHttpGetRequest(roth_set + "?G9.SollTemp=" + (SollTempG9.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 10" when Item SollTempG10 changed then sendHttpGetRequest(roth_set + "?G10.SollTemp=" + (SollTempG10.state as Number * 100).intValue()) end rule "Set Roth Touchline+ temperatures room 11" when Item SollTempG11 changed then sendHttpGetRequest(roth_set + "?G11.SollTemp=" + (SollTempG11.state as Number * 100).intValue()) end //logInfo(logName, "GET request" + roth_set + "?G0.SollTemp=" + (SollTempG0.state as Number * 100).intValue()) Site fil Text label="Gulvvarme" icon="temperature" { //Setpoint item=SollTempG0 valuecolor=[>22="red",>21="green",>20="orange",<=20="blue"] Setpoint item=SollTempG0 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG1 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG2 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG3 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG4 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG5 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG6 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG7 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG8 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG9 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG10 minValue=5 maxValue=30 step=0.5 Setpoint item=SollTempG11 minValue=5 maxValue=30 step=0.5 }