IHC Visual in English

[pilfos]

Hello,

Recently I purchased a IHC Control Visual 2 (6.2), but I can't find the IHC Visual software in English.

Where can I download it from ?

Thanks

 

[Mikkel Skovgaard]

13 minutter siden, pilfos skrev:

Hello,

Recently I purchased a IHC Control Visual 2 (6.2), but I can't find the IHC Visual software in English.

Where can I download it from ?

Thanks

 

I think they stopped translating it - but basicall its all stored in text inside: C:\Program Files (x86)\LK IHC 2.8 Control\IHC Visual - it should be possible to translate it all. Just do a compare of the old version and the new one. The old one had an English version as far as i know

[pilfos]

21 timer siden, Mikkel Skovgaard skrev:

I think they stopped translating it - but basicall its all stored in text inside: C:\Program Files (x86)\LK IHC 2.8 Control\IHC Visual - it should be possible to translate it all. Just do a compare of the old version and the new one. The old one had an English version as far as i know

where can I find older versions?

[Mikkel Skovgaard]

12 timer siden, pilfos skrev:

where can I find older versions?

Will look

[dimka]

Guys - did you find English version ? I need to install on new PC and can't find old FTP site anymore..

[pilfos]

27 minutter siden, dimka skrev:

Guys - did you find English version ? I need to install on new PC and can't find old FTP site anymore..

No, I didn't find the english version.. and just today arrived the "toy" :-)

[dimka]

1 time siden, pilfos skrev:

No, I didn't find the english version.. and just today arrived the "toy" :-)

Well.. I did find old 2.7.2 English version on my disk - I can send you if you wish. In my particular case I had to upgrade to newer 2.8.x FW to get trusted certificates and now it seems that FW does not wish to talk to 2.7 App.. With Danish 2.8 app it talks and pulls project from controller.

 

Also - was trying to have a help from support chat at lk.dk. Absolutely useless - he has no clue on what am I asking and the only answer - look yourself of ask El installer.

[pilfos]

48 minutter siden, dimka skrev:

Well.. I did find old 2.7.2 English version on my disk - I can send you if you wish. In my particular case I had to upgrade to newer 2.8.x FW to get trusted certificates and now it seems that FW does not wish to talk to 2.7 App.. With Danish 2.8 app it talks and pulls project from controller.

 

Also - was trying to have a help from support chat at lk.dk. Absolutely useless - he has no clue on what am I asking and the only answer - look yourself of ask El installer.

Yes, please, it would be great! how do you check the FW version? 

 

[dimka]

26 minutter siden, pilfos skrev:

Yes, please, it would be great! how do you check the FW version? 

 

There is Firmware loader as part of the package - you have to connect via USB as far I remember.. Or - in IHC Visual - if you are able to connect .. or - somewhere in one of Java Tools that you can run from Controller directly

[pilfos]

31 minutter siden, dimka skrev:

There is Firmware loader as part of the package - you have to connect via USB as far I remember.. Or - in IHC Visual - if you are able to connect .. or - somewhere in one of Java Tools that you can run from Controller directly

btw, I've sent a private message to you with the email address you can send the IHC Visual to

[dimka]

19 minutter siden, pilfos skrev:

btw, I've sent a private message to you with the email address you can send the IHC Visual to

hehe - and I did reply over there - check it :-)

[pilfos]

21 minutter siden, dimka skrev:

hehe - and I did reply over there - check it :-)

Thanks a lot for the IHC Visual, i have it !!

[pilfos]

Connected !

FW: 2.7.220

Hard: 6.2

 

... and in Egnlish! 

 

After more than 15 years with SimonVIS (the spanish version of IHC Controller 1.0) I will be able to connect my system to the "world", e.g. with Hassio 

[dimka]

Congrats man !

I have been using OpenHAB with IHC for past 7 years :-) And depends on how strict your underlining OS and application - you might need to upgrade to newer FW since 2.7 FW has expired certificates and SSL connect does not accept that :-) 

 

But enjoy IHC Visual ! :-D

[pilfos]

3 timer siden, dimka skrev:

Congrats man !

I have been using OpenHAB with IHC for past 7 years :-) And depends on how strict your underlining OS and application - you might need to upgrade to newer FW since 2.7 FW has expired certificates and SSL connect does not accept that :-) 

 

But enjoy IHC Visual ! :-D

What if you try to connect through USB? ( http://usb ) allowing that domain in java properties?

Do you see the "sprog" option to change language? ( from danish to english). If so, you'll need to restart the application.

[Mikkel Skovgaard]

http://jemi.dk/ihc/starter/

[Kandersen]

På 12.6.2020 at 20:24 , dimka skrev:

Congrats man !

I have been using OpenHAB with IHC for past 7 years :-) And depends on how strict your underlining OS and application - you might need to upgrade to newer FW since 2.7 FW has expired certificates and SSL connect does not accept that :-) 

 

But enjoy IHC Visual ! :-D

I believe he will have to update Visual if he update the firmware. And that will start his main issue all over again, as I dont think the latest Visual is available in english 

[Mikkel Skovgaard]

15 timer siden, Kandersen skrev:

I believe he will have to update Visual if he update the firmware. And that will start his main issue all over again, as I dont think the latest Visual is available in english 

Basically anyone could try and translate all the files in data ... and tada you have english version

 

[pilfos]

1 time siden, Mikkel Skovgaard skrev:

Basically anyone could try and translate all the files in data ... and tada you have english version

 

where are those data files ? I don't see any file that could countain the application literals.

[Kandersen]

2 timer siden, Mikkel Skovgaard skrev:

Basically anyone could try and translate all the files in data ... and tada you have english version

 

I havnt look, but are those files seperated from the main program?

[Mikkel Skovgaard]

C:\Program Files (x86)\LK IHC 2.8 Control\IHC Visual\Data

All the files named *.ihccmd have everything need to translate. I created a tool for scanning these files and that way it was easier to build http://jemi.dk/ihc/webvisual/

[pilfos]

5 timer siden, Mikkel Skovgaard skrev:

C:\Program Files (x86)\LK IHC 2.8 Control\IHC Visual\Data

All the files named *.ihccmd have everything need to translate. I created a tool for scanning these files and that way it was easier to build http://jemi.dk/ihc/webvisual/

Thanks!

[pilfos]

Any hint to create a quick "installation"?

I created a product input on the left (push button 1 key) (the configure output is disabled). Then a product output (generic). 

Finally, I created a function block (toggle block with on/off and timer functions)

I "dragged" the "PB" from the left to the "Toggle" on the right, and the "Output" from the left to the "Output for light" on the right.

I've sent the project to the IHC controller but nothing happens... 

(I have the IHC Visual Controller with an input and output module, and a bulb connected to the output module). And I have a IHC v1 at home so I know how to connect everything... 

[pilfos]

1 time siden, pilfos skrev:

Any hint to create a quick "installation"?

I created a product input on the left (push button 1 key) (the configure output is disabled). Then a product output (generic). 

Finally, I created a function block (toggle block with on/off and timer functions)

I "dragged" the "PB" from the left to the "Toggle" on the right, and the "Output" from the left to the "Output for light" on the right.

I've sent the project to the IHC controller but nothing happens... 

(I have the IHC Visual Controller with an input and output module, and a bulb connected to the output module). And I have a IHC v1 at home so I know how to connect everything... 

Done! I was using another input lane...

Now is working.

[pilfos]

Hello,

I want to control a blind from two different places. But then, how to be sure that the "blind state" is updated correctly from one of the function block so the other can know the correct state?

Thanks

[Infernoken]

Just for your information...

The Belgian Schneider site has the IHC Visual in english:

https://www.se.com/be/nl/partners/electricians/softwares-ihc-visual-2.8.jsp

Visual:

IHC Visual versie 2.8.6